Whisky tasting flight set for Glencairn-style glasses

Flight boards for 2, 3, 4 and 5 tulip-style nosing glasses, a swappable nameplate, a 6-glass drying rack and an under-shelf rail with a fit coupon. Digital 3D-print files: STEP, STL, 3MF and dimensioned PDF drawings. Every part prints flat with no supports on a 256 x 256 mm bed.

$5.99 for the full set Buy the flight set: $5.99

Whisky tasting flight set: 2, 3, 4 and 5 glass boards, nameplates, drying rack and under-shelf rail (3D render)

Flight board sizes in mm: 2-glass 162 x 116, 3-glass 234 x 116, 4-glass 204 x 176, 5-glass 242 x 176

Detail: 50.8 mm glass recesses 3 mm deep, engraved position numbers and a swappable 90 x 22 mm nameplate

Flight boards, drying rack and under-shelf rail with empty generic tulip glasses (render props, not included)

What's in the set

Flight boards for 2, 3, 4 and 5 glasses: 50.8 mm (2 in) recesses 3 mm deep, engraved position numbers, 10 mm thick. 162 x 116, 234 x 116, 204 x 176 and 242 x 176 mm.
Swappable nameplate: a 90 x 22 mm plate drops into a pocket on each board. One has raised "TASTING FLIGHT" text, one is blank for your own label.
6-glass drying rack: glasses stand rim-down on ribs, with a drain notch.
Under-shelf rail (240 mm): screws under a shelf; glasses slide in and hang by the foot. A 30 mm fit coupon lets you check your glasses before printing the full rail.
STEP, STL and 3MF for every part, dimensioned PDF drawings, automated print-check report, README and parametric build123d source (recess diameter, rail foot gap and opening are parameters).

Fit

Made around the published Glencairn glass spec (115 mm high, 66 mm max diameter, 200 ml). The 46 mm foot diameter comes from a retailer listing, not the maker. Tulip glasses vary, so print the fit coupon first.

Print settings

PLA or PETG, 0.2 mm layers, 3 walls, 15-20% infill, no supports. Print the nameplate in a contrast colour or swap filament at the text layer. Hand wash only.

Questions

Questions or feedback? Contact us anytime.

Images are 3D renders, not photos of prints. Not affiliated with, endorsed by or sponsored by Glencairn Crystal. The name is used only to describe fit.

Digital files only; nothing ships. You get a download link right after checkout. Personal use licence: print for yourself; don't share or resell the files.

Buy the flight set: $5.99

FAQ

Which glasses does it fit?

Tulip-style nosing glasses such as Glencairn-style whisky glasses. Recesses are 50.8 mm; the diameter is a parameter in the source if your glasses differ.

Do the parts need supports?

No. Every part prints flat with no supports and fits a 256 x 256 mm bed.

Are glasses included?

No. These are digital files only. Glasses in the images are generic render props.

Is anything shipped?

No. These are digital files only. You get a download link right after checkout.

How do I get in touch?